Experience Homestyler V5.0 and get free renders!

Homestyler Official 2023-4-3

📖 Challenge Overview

Welcome to experience Homestyler V5.0! For this time, we prepare two challenges for you: In the first challenge, you need to create a complete design project in Homestyler V5.0. We will send free renders to all the participants, and the winners can get more advanced membership benefits. In the second challenge, it's highly appreciated that you could give us suggestions or feedback on the new version, and you will get free renders and membership benefits. These two challenges last only 10 days, join now!😄🏃&zwj;♀️🎁

⌚️ Challenge Time

2023.04.03-2023-04-13

🎁 Challenge Award

*Each participant has the opportunity to get the following rewards at the same time

Challenge 1 Rewards

● Participation Award: Entries that meet the requirements will receive 2 free 4k renders after the challenge, and each participant can only get one time at most.

● Best Design Award (10 winners): One-month Pro membership

Challenge 2 Rewards

● Best Feedback Award (30 winners): 10 x 4k renders + 10-day Styler membership

*Rewards will be distributed after the competition

☕️ Challenge Rule

Challenge 1 - Rules:

In this challenge, we will not limit the style, theme and type of space.

You just need to design a project with Homestyler V5.0 and join this challenge. Click to Start Design

The following designs do not meet the challenge requirements: V4.0 upgrade design, Autostyler design, Template design and novice guidance design.

Challenge 2 - Rules:

In the process of experiencing the new version, you can mainly use the new functions described in the documentation. (Homestyler5.0 new features and usage documentation: https://www.homestyler.com/learn/new-release_floor-planner-v5.0---2023.03.28/

We hope you can send at least three valid feedbacks on Homestyler V5.0 to our email address (email address：

homestyler.contest@service.alibaba.com).

Each feedback should include the following content: feedback function and difficulty in use.

🏃Entry Process

Challenge 1 Entry Process: Click here to submit designs of V5.0

Go to the Community>Challenge page and select this contest to submit your work.

Challenge 2 Entry Process: After finishing the feedback as required, send it to this mailbox. (email address：

homestyler.contest@service.alibaba.com)

4100 34

评论(34)

head-img

Homestyler Official 2023-4-6

Thank you for your feedback, we will fix it as soon as possible😊 @ RANS DECOR CO.

Hi Homestyler, great contest.. On the V5, I set my preferences to "FEET" but my walls are shown in inches, can you make it like V4 where you can see it as feet? (Like for example 4'4") Thank you..

回复

head-img

RANS DECOR CO. 2023-4-4

Hi Homestyler, great contest.. On the V5, I set my preferences to "FEET" but my walls are shown in inches, can you make it like V4 where you can see it as feet? (Like for example 4'4") Thank you..

回复

head-img

Grace Simmons 2023-4-3

Started a design in V5 but had to rethink the floor plan due to the fact that the 'edit floor' function DOES NOT WORK with curved walls.....Which is the BEST part of V5!!!!! Already sent email to support, no response yet. How about fixing that???? @homestyler

回复

head-img

FUTRHOMES, LLC 2023-4-14

When I converted from V4 to V5, the measurements show in inches, not in feet. It shows in cm and m without issue, but when you go to feet, it only shows in inches. Please correct. Thanks!

attachment

回复

head-img

Grace Simmons 2023-4-14

Custom Furniture: the Horizontal AND Vertical handles are all being placed in the VERTICAL position. The system will not allow for the change to horizontal. You might want ot fix this....ASAP @homestyler

回复

head-img

Grace Simmons 2023-4-13

A lot of problems....You can say that again. It looks like they created the contest just for us to find the bugs. And when they say the bugs are fixed, they really aren't. @ ROBERTA GIULIETTI

HS never answers - there are a lot of problems in 5.0

回复

head-img

ROBERTA GIULIETTI 2023-4-13

HS never answers - there are a lot of problems in 5.0 @ Grace Simmons

Started a design in V5 but had to rethink the floor plan due to the fact that the 'edit floor' function DOES NOT WORK with curved walls.....Which is the BEST part of V5!!!!! Already sent email to support, no response yet. How about fixing that???? @homestyler

回复

head-img

Paola Imparato 2023-4-4

oh

回复

head-img

Grace Simmons 2023-4-27

You fixed the V5 custom furniture handle issue. Now can you fix the facr that drawer panels are placed in the WRONG position???? @Homestyler

attachment

回复

head-img

Grace Simmons 2023-4-23

V5 measurements.......Right side context menu is WRONG. Partial wall set at 4" yesterday is now registering in the side menu as 472 FEET HIGH when it obviously is not. @homestyler

attachment

回复

head-img

Grace Simmons 2023-4-23

V5 sunken floor measurements: the measurements CAN NOT be adjusted manually thru the right side menu. When you do that the floor part disappears. It can only be seen when it is at 16'5"---which is OBVIOUSLY WRONG.

attachment

回复

head-img

Grace Simmons 2023-4-23

V5 needs fixing ASAP. The measurements have all gone haywire since yesterday. The right side menu is ALL WRONG. The couch in this picture--according to the menu is 113 FEET HIGH

attachment

回复

head-img

Grace Simmons 2023-4-19

Flue, Square Column, Cyinder and Riser models DO NOT support tile flooring customization function. Which means when you apply a wood grain texture you CAN NOT change the way the grain is applied. Need to add rotation to change wood grain back and forth from horizontal to vertical. @homestyler

回复

head-img

Everette Austin 2023-4-18

love This! very easy to use.. thank you

回复

head-img

Grace Simmons 2023-4-15

The material brush IS NOT WORKING: you can't use it with custom colors(hex codes or RGB codes) chosen on door /window frames. Custom models/furniture: you can't choose custom color using hex codes/RGB codes in the custom interface. @homestyler

attachment

回复

head-img

Grace Simmons 2023-4-15

In a 2 story design, with the 2nd story foor partially removed the walls are still showing the separation when rendered. Even if the 1st and 2nd floors are the same colors. Was told tis would be fixed. But it is still happening. AND IT IS A CONTEST ENTRY. Any clue when this will be fixed????? @homestyler

attachment

回复

head-img

Yelena Omarova❤️ 2023-4-15

Здравствуйте , никак не могу добавить стен в бохо , сделала кусочек от квартиры и всё встало , план я хотела совсем другой вместо спальни проходная -гардеробная и ванную не могу дорисовать , и выход с квартиры в прихожую не получается , помогите что сделать ? Стены больше нигде не ставятся. Ещё переименовала помещения их тоже нет, при рендере меняется заливка. Но главное это стены , как их добавить ?

attachment

回复

gomal91301 2023-4-14

easy to use

回复

head-img

Sandra Lawson 2023-4-12

I've created my own designs since 2016. I wish I have old other designs but I damage my own account on Facebook.

回复

head-img

Yelena Omarova❤️ 2023-4-11

Программа классная , я просто в восхищении , я не очень люблю серый, чёрный и бежевый в интерьерах, потому что для меня это, как типовое проектирование ( я враг всему типовому) , я так люблю ваши рендеры , это так здорово ,так всё просчитывает каждый листочек, в другой программе это невозможно , я просто счастлива, когда работаю в вашей программе , я забываю про время , про сон и еду.

attachment

回复

head-img

Yelena Omarova❤️ 2023-4-11

Хочу ещё добавить , первый раз сделала вид сверху в 4К у меня получился нечёткий , не резкий план и слетела качеля, её нет на плане. Второй раз я сделала 2К, получился план намного более чёткий , хотя должно быть наоборот , и на 2К уже всё слетело : нет на нём качелей, нет шезлонгов и нет кресла подвесного и зонтика тоже нет , только тени на генплане от этих предметов. Вот вроде всё включено и я не отключала , почему-то нет.

attachment

回复

head-img

Yelena Omarova❤️ 2023-4-11

Unfortunately, there is very little time for the project, I see many of my mistakes, but I no longer correct them. very little time for a project and little time to learn a new program. Thank you very much for the round walls, I have long wanted to make a glass tower.

attachment

回复

head-img

Yelena Omarova❤️ 2023-4-11

I want to add that the doors are easily inserted into the glass wall, but the plinth did not work out for me. When I made a paraped to the roof, I could not remove the upper part of the wall and it hung like a flying saucer over the building, but in version 4 I had this, I probably don’t know the program well.

attachment

回复

head-img

Yelena Omarova❤️ 2023-4-11

Hello ! I have long wanted to design a house with a round glass wall, and it turned out great! At first, everything closed for me and there was a black screen, and all the plantings in the garden completely shifted and I transplanted them 3 times, maybe it was me, and not the program, that I did something wrong.

回复

Nur Auda 2023-4-10

Hi homestyler! Are you guys able to switch back to the previous setting where we scale the floorplan according to the length of the wall instead of the sqm of the space? Sometimes we don't necessarily have the sqm of the space according to the floorplan as it has odd shapes

回复

head-img

Svetlana Karpova 2023-4-9

Hello homestyler! Thanks for the new contest! Everything is fine! From the comments. I placed a window from the new window selection suggestion, but I can't apply a different material to them, and I can't remove them either. Otherwise, everything is the same as in the old version.

回复

head-img

Grace Simmons 2023-4-9

V5: Custom cabinets.....Why can't I choose materials that I uploaded. I can get materials that I have saved to favorites. I need to be able to use my uploads, not only from your inventory. Can you fix that????? Thank You. @homestyler

回复

head-img

Sandra Lawson 2023-4-8

I'm old school person and I've already got the hand over it, but I still prefer to use my own designs, which I've created years ago, long before I change my account number. Lol! @ Homestyler Official

Thank you for your feedback, we will fix it as soon as possible😊

回复

head-img

Grace Simmons 2023-4-8

V5 CONTEST.....2 story wall glitch. After removing the floor there seems to be a glitch that shows the wall separating. Know it won't be fixed before contest is over, but you really need to get this fixed ASAP @homestyler

attachment

回复

omabizari630 2023-4-6

good luck

回复

head-img

Grace Simmons 2023-4-6

Any word on when we will be able to use 2020 .SKP files (3DWarehouse)???????

attachment

回复

head-img

Grace Simmons 2023-4-6

Created a loft in V5 but now I can't make my windows 2 story height. With 10 ft walls on both floors, I used to be able to place a window in the wall and change the height to 18 ft. I can't do that any more. Now instead of a great looking window, I get a window with a wall (floor level) through it. Any idea when you are going to fix this??????? @homestyler

回复

head-img

Homestyler Official 2023-4-4

We will fix this as soon as possible. @ Grace Simmons

Any reason why the parameterized curved window 2 Will not go any taller than 9'2" with a 1 ft elevation on a 12 ft wall???????? @homestyler

回复

head-img

Grace Simmons 2023-4-4

Any reason why the parameterized curved window 2 Will not go any taller than 9'2" with a 1 ft elevation on a 12 ft wall???????? @homestyler

回复

🎉 任务完成！你已获得金币！

前往领取